Toshiba Security Camera IK TF7H User Manual

SPECIFICATIONS  
INSTRUCTION MANUAL  
Image sensor  
Output pixels  
Sensitivity  
1/3 inch Progressive CCD  
Horizontal : 1024, Vertical : 768  
F6.8 standard (2000 lx)  
3CCD CAMERA HEAD  
Minimum intensity of  
illumination for objects  
14 lx (F2.2, Sensitivity + 18 db)  
Lens mount  
C mount (flange back : 17.526 mm in-air)  
0ºC to 40ºC (32º F to 104º F)  
Less than 90 %  
IK-TF7H  
Ambient temperature  
Ambient humidity  
Weight  
INFORMATION  
Approx. 65 g (0.143 lbs)  
This equipment has been tested and found to comply with the limits for a Class A digital device,  
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection  
against harmful interference when the equipment is operated in a commercial environment. This  
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in  
accordance with the instruction manual, may cause harmful interference to radio communications.  
Operation of this equipment in a residential area is likely to cause harmful interference in which case  
the user will be required to correct the interference at his own expense.  
Design and specifications are subject to change without notice.  
* For more information, please refer to the section “10. SPECIFICATIONS” in IK-TF7U instruction manual.  
OPTIONAL PARTS  
For further details, contact your camera dealer.  
USER-INSTALLER CAUTION: Your authority to operate this FCC verified equipment could be voided  
if you make changes or modifications not expressly approved by the party responsible for compliance  
to Part 15 of the FCC rules.  
Camera control unit  
Type name  
Camera cable  
Type name  
Length m  
Length inch  
IK-TF7U  
EXC-TX03  
Approx.3  
Approx.118  
This Class A digital apparatus complies with Canadian ICES-003.  
Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada.  
EXTERIOR DIMENSIONS  
Following information is only for EU-member states:  
Unit : mm [inch]  
The use of the symbol indicates that this product may not be treated as household waste.  
By ensuring this product is disposed of correctly, you will help prevent potential negative  
consequences for the environment and human health, which could otherwise be caused  
by inappropriate waste handling of this product. For more detailed information about the  
take-back and recycling of this product, please contact your supplier where you purchased  
the product or consult.  
32.6 [1.28]  
41 [1.61]  
4.8 [0.19]  
CAUTIONS ON USE  
Please use this apparatus by connecting only with camera control unit IK-TF7U.  
Read the “CAUTIONS ON USE AND INSTALLATION” in the instruction manual of IK-TF7U and follow them.  
Front  
Side  
Rear  
COMPONENTS  
(1) Camera head (without lens) .............................................................................. 1  
(2) Accessories  
4.5 [0.18]  
22 [0.87]  
(a) Instruction manual........................................................................................ 1  
CONNECTION  
Lens  
(option)  
IK-TF7U (option)  
Camera head  
Cable (option)  
Camera Cable  
(option)  
Camera  
control unit  
DC IN 12V  
2-M3 (Standard)  
Depth 5 [0.2]  
Two holes of the top  
view are the same as  
these two holes.  
2-M3  
Depth 3 [0.12]  
Flange  
face  
Rear projection less than 4mm (0.157")  
DC power supply (option)  
Bottom  
When connecting the camera cables, be sure to turn off the camera control unit and the other equipment  
connected.  
We suggest that a c-mount lens designed specially for 3CCD cameras is used.  
When using other lens, the best camera performance of this camera may not be obtained.  
(For example, low resolution may occur, focus may be lost through the range of a zoom lens, and flare,  
ghost or shading may occur)  
DISCLAIMER  
Furthermore, to avoid damaging the camera, use a lens which has a rear projection from the flange face  
of less than 4mm (0.157”).  
We disclaim any responsibility and shall be held harmless for any damages or losses incurred by the user  
in any of the following cases:  
DC power is supplied by a camera cable model # EXC-TX (option) through the camera control unit  
**  
1. Fire, earthquake or any other act of God; acts by third parties; misuse by the user, whether intentional or  
accidental; use under extreme operating conditions.  
2. Malfunction or non-function resulting in indirect, additional or consequential damages, including but not  
limited to loss of expected income and suspension of business activities.  
3. Incorrect use not in compliance with instructions in this instruction manual.  
4. Malfunctions resulting from misconnection to other equipment.  
5. Repairs or modifications made by the user or caused to be made by the user and carried out by an  
unauthorized third party.  
6. Notwithstanding the foregoing, Toshiba’s liabilities shall not, in any circumstances, exceed the purchase  
price of the product.  
model #IK-TF7U (option).  
* “ ” shows a camera cable type name. Refer to the “Type name” of a camera cable in “OPTIONAL PARTS”.  
**  
Refer to the IK-TF7U Instruction Manual section “4.CONNECTION”.  
Limited Warranty – TOSHIBA CCD Camera  
TheImagingSystemsDivisionofToshibaAmericaInformationSystems,Inc.(“ISD”)makesthefollowinglimitedwarranties  
with regard to this CCD Camera (“Product”). These limited warranties extend to the Original End-User (“You[r]”).  
One (1)Year Limited Warranty of Labor and Parts  
ISD warrants that this Product will perform in accordance with specifications for a period of one (1) year from the date  
of purchase by the Original End-User. During this one (1) year period, ISD will repair or replace the Product, if it does  
not perform as warranted. In order to take advantage of this Limited Warranty, You must: (a) deliver the Product to an  
ISD Authorized Service Provider (“ASP”); and (b) pay all transportation and insurance charges for shipment of the  
Product to the ASP. ISD reserves the right to substitute factory refurbished parts in place of those in need of repair.  
COPYRIGHT AND RIGHT OF PORTRAIT  
There may be a conflict with the Copyright Law and other laws when a customer uses, displays, distributes,  
or exhibits an image picked up by a television camera without permission from the copyright holder. Please  
also note that transfer of an image or file covered by copyright is restricted to use within the scope permitted  
by the Copyright Law.  
Instruction Manual (Owner’s Manual):  
You should read the Instruction Manual (Owner’s Manual) thoroughly before operating this Product. Before seeking  
warranty service, you should check the troubleshooting guide in the Instruction Manual (Owner’s Manual) and  
follow the instructions to correct the problem.  
PROTECTION OF PERSONAL INFORMATION  
Images taken by the camera that reveal the likeness of an individual person may be considered personal  
information. To disclose, exhibit or transmit those images over the internet or otherwise, consent of the person  
may be required.  
Your Responsibilities  
This Limited Warranty is subject to the following conditions:  
1. You must provide the bill of sale or proof of purchase at the time that warranty service is required.  
2. You must notify an ASP within thirty (30) days after You discover that the Product does not perform in accordance  
with specifications during the Limited Warranty period.  
3. All warranty servicing of this product must be made by an ISD Authorized Service Provider.  
4. You must pack the Product in its original carton using the original packing material, then insert the original carton  
containing the Product into another carton with additional packing material before shipping the Product to an ASP.  
LIMITATION OF USAGE  
The product is not designed for any “critical applications.” “Critical applications” means life support systems,  
exhaust or smoke extraction applications, medical applications, commercial aviation, mass transit applications,  
military applications, homeland security applications, nuclear facilities or systems or any other applications  
where product failure could lead to injury to persons or less of life or catastrophic property damage. Accordingly,  
[Toshiba/TAIS] disclaims any and all liability arising out of the use of the product in any critical applications.  
DISCLAIMERS:  
ALL OTHER EXPRESS OR IMPLIED WARRANTIES ON THIS PRODUCT, INCLUDING THE IMPLIED  
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE HEREBY  
DISCLAIMED.SOME STATES DO NOT ALLOWTHE EXCLUSION OF IMPLIEDWARRANTIES OR LIMITATIONS  
ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATIONS MAY NOT APPLY TOYOU.  
IF THIS PRODUCT IS NOT IN GOOD WORKING ORDER AS WARRANTED ABOVE, YOUR SOLE AND  
EXCLUSIVE REMEDY SHALL BE THE REPAIR OR REPLACEMENT OF THE PRODUCT. IN NO EVENT WILL  
ISD OR ITS PARENT COMPANY OR ANY ASP BE LIABLETOYOU OR ANYTHIRD PARTY FOR ANY DAMAGES  
IN EXCESS OF THE PURCHASE PRICE OF THE PRODUCT. THIS LIMITATION APPLIES TO DAMAGES  
OF ANY KIND, INCLUDING ANY DIRECT OR INDIRECT DAMAGES, LOST PROFITS, LOST SAVINGS OR  
OTHER SPECIAL, INCIDENTAL, EXEMPLARY OR CONSEQUENTIAL DAMAGES, WHETHER FOR BREACH  
OF CONTRACT, TORT OR OTHERWISE, OR WHETHER ARISING OUT OF THE USE OF OR INABILITY TO  
USE SUCH PRODUCT, EVEN IF TAIS, ITS PARENT COMPANY, OR AN ASP HAS BEEN ADVISED OF THE  
POSSIBILITY OF SUCH DAMAGES OR OF ANY CLAIM BY ANY OTHER PARTY. SOME STATES DO NOT  
ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR SOME  
PRODUCTS, SO THE ABOVE LIMITATIONS OR EXCLUSIONS MAY NOT APPLY TOYOU.  
CAUTIONS ON USE AND INSTALLATION  
Handling the unit.  
Do not drop, jolt, or vibrate, as this may result in damage to the unit. This may cause problems. Treat the camera  
cables carefully to prevent cable problems, such as breaks in the cable and loose connections.  
Install the camera in a location free from noise.  
If the camera or the cables are located near power utility lines or a TV, etc. undesirable noise may appear on  
the screen. In such a case, try to change the location of the camera or the cable wiring.  
Operating ambient temperature and humidity.  
Do not use the camera in places where temperature and humidity exceed the specifications. Picture quality  
will deteriolate and internal parts may be damaged.  
Be particularly careful when using in places exposed to direct sunlight. When shooting in hot places, depending  
on the conditions of the object and the camera (for example when the gain is increased), noise in the form of  
vertical strips or white dots may occur. This is not a malfunction.  
When not using the camera for extended periods of time.  
Switch the control unit off and disconnect the power supply.  
THISWARRANTY GIVESYOU SPECIFIC LEGAL RIGHTS, ANDYOU MAY ALSO HAVE OTHER RIGHTSWHICH  
MAY VARY FROM STATE TO STATE.  
THIS LIMITED WARRANTY SHALL BE VOID IF THE PRODUCT OR PARTS HAVE BEEN SUBJECTED TO  
MISUSE,ABUSE,ACCIDENT,IMPROPER INSTALLATION,IMPROPER MAINTENANCE,OR USE INVIOLATION  
OF ISD’S WRITTEN INSTRUCTIONS, OR WHERE THE PRODUCT HAS BEEN ALTERED OR MODIFIED  
WITHOUT ISD’S PRIOR AUTHORIZATION, OR UPON THE REMOVAL OR ALTERATION OF ISD’S FACTORY  
SERIAL NUMBER. LABOR SERVICE CHARGES FOR PRODUCT INSTALLATION, SET UP AND ADJUSTMENT  
OF CONTROLS ARE NOT COVERED BY THIS LIMITED WARRANTY.  
Avoid using or storing the camera in the following places:  
Places filled with highly flammable gas.  
How to Obtain Warranty Service – Step-By-Step Procedures:  
To obtain warranty service, You should:  
Places near gasoline, benzene, or paint thinner.  
Places subject to strong vibration.  
1. Contact an ASP for warranty service within thirty (30) days after the Product fails to comply with specifications.  
2. Arrange for shipment of the Product to an ASP.  
Places containing chemicals (such as pesticides), rubber or vinyl products for extended periods of time.  
3. Securely pack the Product as described above, insure the carton, and include a letter explaining the problem  
and a copy of the bill of sale or proof of purchase.  
The following descriptions are for that a camera control unit “IK-TF7U” connected to this camera head.  
Do not shoot intense light.  
4. Prepay all transportation and insurance costs.  
If there is an intense light at a location on the screen such as a spot light, a blooming and smearing may occur.  
When intense light enters, vertical stripes may appear on the screen. This is not a malfunction. Ghosts may  
occur when there is an intense light near the object. In this case, change the shooting angle.  
Moire  
A moire pattern is an interference pattern generated when two repetitive line patterns overlap. This is not a  
malfunction. Eliminating the repetitive line patterns, or aligning the two patterns, will eliminate the moire.  
Handling of the camera head and protection cap.  
Keep the camera head and protection cap away from as they may pose a choking hazard. The protection cap  
protects the image sensing plane when the lens is removed from the camera head, do not discard.  
When cleaning the camera.  
Unplug the power source before cleaning. Clean with a soft dry cloth only. Do not use chemicals or chemically  
treated cloths. Chemicals may damage coatings and printed letters. When cleaning the lens, use lens cleaning  
paper.  
Questions? If you have any questions, please check ISD’s Web Site or send an e-mail as follows:  
No person, agent, distributor, dealer, authorized service provider, or company is authorized to change, modify,  
or extend the terms of this Limited Warranty in any manner whatsoever. The time within which an action must be  
commenced to enforce any obligation of ISD arising under this Limited Warranty or under any statute, or law of  
the United States or any state thereof, is hereby limited to one (1) year from the date You discover or should have  
discovered the problem. This limitation does not apply to implied warranties arising under state law. Some states  
do not permit limitation of the time within whichYou may bring an action beyond the limits provided by state law, so  
the above provision may not apply to You. This Limited Warranty gives You specific legal rights and You may also  
have other rights which vary from state to state.  
TOSHIBA AMERICA INFORMATION SYSTEMS, INC.  
Imaging Systems Division  
9740 Irvine Boulevard, Irvine, CA 92618-1697  
Installation without a tripod.  
Before installing the camera head, make sure that the location can withstand the total weight of the camera  
head. If this is not the case, reinforce the area to prevent the unit from dropping, which may result in damage  
to the unit or personal injury.  
Copyright © 2007 Toshiba America, Inc. All rights reserved.  
This manual is made from 100% recycled paper.  
 

Timex Watch 814 095006 User Manual
Toastmaster Toaster WST3016ZE User Manual
Toshiba CRT Television 32A42 User Manual
Toshiba DVD Recorder DVR670KU User Manual
Trango Broadband Network Router TrangoLink 10A User Manual
TRENDnet Network Hardware 8 Port 16 Port Rack Mount KVM Switch User Manual
Tripp Lite TV Cables B122 000 60 User Manual
Uniden Cordless Telephone DRX332 User Manual
Vermont Casting Fan C34G624M User Manual
Vivotek Security Camera IP7133 IP7134 User Manual