TP Link Network Card TF 3239D User Manual

Ø
Ø
SupportsACPI, PCIpowermanagement  
Use the drivers supplied by the diskette included in The Product. For  
detail description, please refer to "help" in the diskette provided by the  
Product.  
I/OAddress: Assignedbysystem  
Complies with the IEEE802.3u Fast Ethernet, 100Base-TX  
standardandIEEE802.3CSMA/CD10Base-Tstandard  
SupportsFullDuplexFlowControl(IEEE802.3x)  
Fullduplexdesigntodoubletheperformance  
SupportsAuto-Negotiationfunction  
Software: ODI driver for NetWare 3.x, 4.x, NDIS driver for Microsoft  
LAN manager and Windows 98, Windows ME, Windows NT, Windows  
2000 Packet driver for TCP/IP  
Ø
Ø
Ø
Ø
Ø
User's Guide  
Temperature: 0o C to 40o C (Operating)  
AppendixA:Troubleshooting  
Humidity: 5% to 95% (Non-condensing)  
If you experience any problems with the adapter, first make sure the  
appropriate driver is loaded, the proper cable is connected to the  
adapter port and the hub complies with the adapter specification, such  
as10Mbps10Base-Tor100Mbps100Base-TX. ThenrechecktheLED.  
Auto-setupsIRQandI/Oaddress  
Power consumption: 1W(Max)  
Contains two large (2Kbyte) independent receive and transmit  
FIFOs  
Appendix C: Contact Information  
Ø
Ø
OneSTP/UTPconnectorfor10Mbpsor100MbpsnetworkSpeed  
Provides diagnostic software and one LED to indicate network  
Link/activity  
For help with the installation or operation of the TP-LINK TF-3239D/  
TF-3239DL Adapter, please contact us.  
TheProductprovidedone LEDstoindicatenetworkstatus.  
LINK/ACTIVE LED  
TP-LINK TECHNOLOGIES CO., LTD.  
Ø
Ø
Supports smart remote boot ROM and provides the help for  
RPL/PXE(ExcludeTF-3239DL)  
TF-3239D/TF-3239DL  
Add: Fl.3, Bldg.R1-B, High-Tech Industrial Park, Shennan Road,  
A red LED indicates if the 10 or 100Mbps STP/UTP has been link OK or  
not and is working or not. When the light is OFF, it indicates that the  
STP/UTP port has not been connected or link not OK; When the light  
is ON, it indicates that the STP/UTP port link OK. When the light is  
BLINKING, it indicates that the STP/UTP port is receiving data or  
transmitting data.  
Supports ODI Driver for NetWare 3.x, 4.x, NDIS Driver for LAN  
Manager, Windows 95, Windows NT, Windows 2000, Packet  
driver forTCP/IP  
Shenzhen, China  
10/100M Fast Ethernet Adapter  
Chapter 2 Installation  
Card Installation  
Appendix B: Technical Specification  
ToinsertTheProductintoyourcomputer, follow thestepslistbelow.  
Topology:Star  
1
2
3
Turn off the computer and remove its cover.  
Insert The Product into a PCI slot.  
ConnectorSupported:RJ45  
Standard:IEEE802.310Base-T  
IEEE802.3u100Base-TX  
Secure the Product to the rear of the computer chassis and put  
backthecomputercover.  
TransmissionRate:100Mbpsor200Mbps  
Hardware:IBMPCcompatibles(ItmusthavePCIslot)  
IRQLine: Assignedbysystem  
4
ConnecttheProduct to the networkusing twisted-pair cables.  
Driver Installation  
Made in China  
2
3
4
5
 

Technicolor Thomson DVD Player DTH111E User Manual
Thule Automobile Accessories Kit 2019 User Manual
Toastmaster Fan E17UAC 20 User Manual
Toshiba Laptop X800 User Manual
Traulsen Refrigerator RBC200 User Manual
Triarch Indoor Furnishings 29274 User Manual
Tripp Lite Indoor Furnishings UPSHDEARKIT User Manual
Universal Remote Control Universal Remote TRC 780 User Manual
Viper Automobile Accessories VSM100 User Manual
Weber Gas Grill 38026 User Manual