TOA Electronics Security Camera C CC764 User Manual

COMBINATION  
DOME CAMERA SYSTEMS  
Combination Dome Cameras  
For Outdoor Use  
For Indoor Use  
C-CC564  
C-CC764  
multi function type  
multi function type  
C-CC514  
C-CC714  
standard type  
standard type  
with Ceiling Mount  
Cover C-BC511C  
Brackets and Cover  
For Outdoor Use  
For Indoor Use  
C-BC711P  
C-BC711PM  
Pole Mounting  
Bracket  
C-BC511C  
Ceiling Mount  
Cover  
C-BC511P  
C-BC511U  
C-BC511A  
Ceiling Suspension  
Bracket  
Ceiling Suspension  
Bracket  
Flush Ceiling  
Anchor Bracket  
Mounting Bracket  
C-BC711W  
Wall Mounting  
Bracket  
C-A711DM  
Smoked Dome  
Cover  
C-BC511C-S  
Ceiling Mount  
Cover (Smoked)  
C-BC511W  
Wall Mounting  
Bracket  
C-BC511U-S  
Flush Ceiling Mounting  
Bracket (Smoked)  
Controller and Units  
C-AL80  
C-RM500  
C-IF500  
Alarm Unit  
Remote Controller  
Interface Unit  
 
FEATURES  
Programmable camera operation initiated  
by alarm input.  
Protecting user privacy.  
a) Privacy Masking function.*  
A useful Alarm function allows programming camera operation  
that can be activated by an alarm input.  
Depending on system use requirements, there may be  
several areas that the system administrator decides does not  
require surveillance for whatever reason. Users are allowed  
to select in advance the locations they wish to be excluded  
from surveillance in a camera's field of view.  
Onscreen selected areas can be masked with a rectangle  
and a maximum of 8 areas (a single screen can have 2  
masked areas) can be masked for privacy.  
Desired camera operations such as position replay, touring,  
tracing, and control of the auxiliary terminal can be programmed  
to activate when the camera receives an alarm input. Each  
camera is equipped with three (C-CC564 has eight) alarm inputs  
and each alarm input can be set to respond with different  
preprogrammed operation.  
Preset operation start with Timer program  
function.  
A camera can conveniently be set to begin operation at a  
preset time with an builtin timer. Each camera has a clock  
function that can be set to initiate operation at a preset time.  
The timer can be set for a specific date, day of the week, or  
daily. Up to 16 different timer programs can be set.  
Software for maintenance.  
b) Restricting camera movement.  
TOA cameras include dedicated software that allows easy  
titles to be set and to create a backup of parameters with  
a PC.  
In addition to masking areas for privacy, a hardware-oriented  
method is also available. A camera's rotation range in both  
horizontal and vertical directions can be restricted to exclude  
areas from surveillance.  
Flexible installation options.  
TOA cameras can easily be installed on ceilings, walls or on  
Outdoor installation ready.  
(meets IP66 standards)  
poles thanks to the wide range of mounting brackets available.  
C-CC714 and C-CC764 utilize a waterproof and dustproof  
design that fully conforms to IP66 standards and can be safely  
installed outdoors. Cameras are cased in a special housing that  
withstands outdoor conditions, allowing them to be installed  
outdoors, even if the location is directly exposed to rain.  
Titling options.  
To facilitate camera use, various titles can be input and displayed  
on the monitor. In addition to camera and position titles, other  
titles for display include trace title, displayed while the trace  
function is on, tour title, displayed when tour function is activated,  
and alarm title displayed when an alarm input is received.  
Withstands cold weather conditions.  
Other functions.  
C-CC714 and C-CC764 incorporate a heating circuit that allows  
operation in severe temperatures down to –40°C. Heating is  
automatically turned on when ambient temperatures go below  
0°C and will automatically switch off when the temperatures rise.  
Tilt (vertical) range: +5° — –185°.*  
Auto flip function*  
Rotation speed can be varied to match lens zooming ratio  
in manual operation mode.  
Note: Turning the camera on if the camera interior is below 0°C may  
not result in producing an immediately viewable image. Once the  
camera interior temperature rises above 0°C, images will be viewable.  
Freeze preset function*  
Displays the still image during camera movement between preset positions.  
Flicker-free operation  
The camera is equipped with 3 (C-CC564 has 8) alarm  
inputs and 1 auxiliary contact output.  
RS-485 protocol control.  
Route tracing facilitates subject monitoring.  
In order to make it easy to follow a subject  
along a route, the camera can be set to  
automatically monitor preset points for  
up to 60 seconds. Two different routes  
can be programmed.  
Function Comparison Chart  
C-CC514  
C-CC564  
C-CC714  
C-CC764  
Minimum Illumination  
1 lx (50 IRE)  
3 lx (50 IRE)  
1 lx (20 IRE)  
1 lx (50 IRE)  
0.3 lx (20 IRE)  
3 lx (50 IRE)  
1 lx (20 IRE)  
(High-Sensitivity: OFF) 0.3 lx (20 IRE)  
Wide Dynaic Function  
B/W Mode Function  
Optical Zooming  
22x  
23x  
22x  
23x  
Configuring programmable tours.  
Zoom Speed  
(WIDE end to TELE end)  
(preset operation)  
Approx. 1.3s  
Approx. 2.4s  
Approx. 1.6s  
Approx. 2.9s  
Approx. 1.3s  
Approx. 2.4s  
Approx. 1.5s  
Approx. 2.9s  
Through combinations of the 255 preset positions and trace  
function, a camera can be programmed to automatically and  
continuously repeat a travel pattern as a tour. Up to 16 tour  
patterns can be programmed. Any tour program is able to  
have a different travel pattern that can be activated by an  
alarm input or timer.  
(manual operation)  
Rotating Range (Tilting)  
Operating Temperature  
Dust/Water Capability  
Auto Flip Function  
+5° to – 95°  
+5° to – 185°  
+5° to – 90°  
+5° to –185°  
–10˚C to +50˚C  
–40˚C to +50˚C  
IP66  
Freeze Preset Function  
Privacy Mask Function  
Up to 8  
(up to 2 each frame)  
Up to 8  
(up to 2 each frame)  
Motion Detection Function  
*C-CC764 and C-CC564 only  
 
C-CC764/C-CC-714  
COMBINATION DOME CAMERA (OUTDOOR USE)  
C-CC764 FEATURES  
• 255 preset positions  
C-CC714 FEATURES  
• 255 preset positions  
• 276X zoom (optical 23X, electronic 12X)  
• Tilt rotation range +5° – -185°  
(using Auto-Flip function)  
• Pan rotation range continuous 360°  
• Pan/tilt maximum rotating speed is 360°/sec  
• 1/4 type CCD image device  
• 480 lines high resolution  
• 264X zoom (optical 22X, electronic 12X)  
• Tilt rotation range +5° – 90°  
• Pan rotation range continuous 360°  
• Pan/tilt maximum rotating speed is 360°/sec  
• 1/4 type CCD image device  
• 480 lines high resolution  
• Autofocus  
• Wide dynamic range  
• Autofocus  
• High-sensitivity function  
(color mode)  
• Preset sequency function  
• Restricting camera movement  
• Auto-trace function  
• Auto-tour function  
• Auto-pan function  
• High-sensitivity function  
(color and B/W modes)  
• Preset sequency function  
• Privacy masking function  
• Restricting camera movement  
• Auto-trace function  
• Dust/Water Protection: IP66  
• RS-485 protocol compatible  
• Auto-tour function  
• Motion detection function  
• Auto-pan function  
• Preset image freeze function  
• Dust/Water Protection: IP66  
• RS-485 protocol compatible  
C-CC714 SPECIFICATIONS  
C-CC764 SPECIFICATIONS  
Power source  
Power consumption  
Control  
24V AC 50/60Hz (2P loose end)  
Power source  
Power consumption  
Control  
24V AC 50/60Hz (2P loose end)  
10W (normal operation), 80W max.  
10W (normal operation), 80W max.  
RS-485 communications system (new protocol compatible)  
VBS 1.0V(p-p), 75, BNC-R jack  
RS-485 communications system (new protocol compatible)  
VBS 1.0V(p-p), 75, BNC-R jack  
Video Output  
Video Output  
Camera Control Terminal RS-485 camera control connector, multi-pair cable 8P, loose end (3P of 8P)  
Camera Control Terminal RS-485 camera control connector, multi-pair cable 8P, loose end (3P of 8P)  
Alarm Input  
3 channels, no-voltage make contact input, open voltage: 18V DC,  
short-circuit current; Under 2mA (settable alarm action),  
multi-pair cable 8P, loose end (3P of 8P)  
Alarm Input  
3 channels, no-voltage make contact input, open voltage: 18V DC,  
short-circuit current; Under 2mA (settable alarm action),  
multi-pair cable 8P, loose end (3P of 8P)  
Auxiliary Contact Output 1 channel, open collector output, withstand voltage: 30V DC,  
Auxiliary Contact Output 1 channel, open collector output, withstand voltage: 30V DC,  
permissible current: Under 100mA, multi-pair cable 8P, loose end (1P of 8P)  
permissible current: Under 100mA, multi-pair cable 8P, loose end (1P of 8P)  
Synchronization  
ID  
Internal synchronization/power synchronization  
Synchronization  
ID  
Internal synchronization/power synchronization  
(phase adjustable when in power synchronization mode)  
(phase adjustable when in power synchronization mode)  
8 characters (alphanumeric and symbols)  
Camera, Position, Trace, Auto-pan, Tour, Home, Alarm, Sector, AUX  
8 characters (alphanumeric and symbols)  
Camera, Position, Trace, Auto-pan, Tour, Home, Alarm, Sector, AUX  
No. of Preset Positions  
Automatic Operation  
Timer  
255 Positions  
No. of Preset Positions  
Automatic Operation  
Timer  
255 Positions  
Auto-pan, Preset sequence, Auto-trace (2 preset patterns (60s)), Tour (16 preset patterns)  
Refresh: Starts at the preset time every day or every week by timer settings  
Program: Settable 16 actions  
Auto-pan, Preset sequence, Auto-trace (2 preset patterns (60s)), Tour (16 preset patterns)  
Refresh: Starts at the preset time every day or every week by timer settings  
Program: Settable 16 actions  
Camera  
Camera  
Image device  
Resolution  
S/N ratio  
1/4 type CCD  
Horizontal: 480 lines (at center)  
50dB  
Image device  
Resolution  
S/N ratio  
1/4 type CCD  
Horizontal: 480 lines (at center)  
50dB  
Minimum Illumination  
High-sensitivity function 0FF: 1 lx (50 IRE), 0.3 lx (20 IRE)  
High-sensitivity function 0N: 0.03 lx (50 IRE), 0.01 lx (20 IRE)  
Minimum Illumination  
High-sensitivity function 0FF: 3 lx (50 IRE), 1 lx (20 IRE)  
High-sensitivity function 0N: 0.03 lx (50 IRE), 0.01 lx (20 IRE)  
Backlight Compensation Pattern 1/Pattern 2/Pattern 3/OFF  
High-Sensitivity Function Slow shutter mode (32 times max.)  
Backlight Compensation WIDE DYNAMIC/Pattern 1/Pattern 2/Pattern 3/OFF  
Dynamic Range 46dB (backlight compensation: WIDE DYNAMIC operation)  
High-Sensitivity Function B/W mode and slow shutter mode (32 times max.)  
White Balance  
Flicker Reduction  
Electronic Zooming  
Auto-Focus  
ATW/AWB  
Automatic correction  
12x zooming  
White Balance  
Flicker Reduction  
Electronic Zooming  
Auto-Focus  
ATW/AWB  
Automatic correction  
12x zooming  
One push/stop AF/continuous  
Lens  
One push/stop AF/continuous  
Zooming  
22x  
Lens  
Effective Focal Length  
Effective Angle of View  
Maximum Aperture  
Zoom Speed  
f = 4.0 – 88mm (22X)  
Horizontal: 47.3° (W) – 2.2° (T), Vertical: 36.5° (W) – 1.7° (T)  
F 1.6 (W) – F 3.8 (T)  
WIDE end to TELE end  
Approx. 1.3s (preset operation), Approx. 2.4s (manual operation)  
Zooming  
23x  
Effective Focal Length  
Effective Angle of View  
Maximum Aperture  
Zoom Speed  
f = 3.6 – 82.8mm (23X)  
Horizontal: 54° (W) – 2.5° (T), Vertical: 41.6° (W) – 1.9° (T)  
F 1.6 (W) – F 3.7 (T)  
WIDE end to TELE end  
Approx. 1.5s (preset operation), Approx. 2.9s (manual operation)  
Pan/Tilt Head  
Rotating Range  
Rotating Speed  
Panning: Endless 360° rotation, Tilting: +5° to –90°  
Panning/Tilting: 360°/s max. (preset operation), 360°/s max. (manual operation)  
Pan/Tilt Head  
Rotating Range  
Rotating Speed  
Panning: Endless 360° rotation, Tilting: +5° to –185°  
Panning/Tilting: 360°/s max. (preset operation), 360°/s max. (manual operation)  
Other Function  
Manual Limit  
Operating Temperature  
Operating Humidity  
Application  
–40˚C to +50˚C  
Under 90% RH (no due condensation produced)  
Indoors and outdoors (except seaside, industrial districts and locations exposed to fine particles,  
where the unit is subject to corrosion, and heights that expose the unit to strong wind pressure)  
IP66  
Case, top cover and decorative frame: PC resin, light gray  
Sunshade: Aluminum, light gray, paint  
Dome cover: PC resin (transparent)  
Camera section external diameter: ø230  
Dome external diameter: ø 150mm  
Other Function  
Auto-Pan, Freeze Preset, Manual Limit, Privacy Masking (up to 8),  
Motion Detect (each 8 presets at each 4 positions)  
–40˚C to +50˚C  
Under 90% RH (no due condensation produced)  
Indoors and outdoors (except seaside, industrial districts and locations exposed to fine particles,  
where the unit is subject to corrosion, and heights that expose the unit to strong wind pressure)  
Operating Temperature  
Operating Humidity  
Application  
Dust/Water Protection  
Finish  
Dust/Water Protection  
Finish  
IP66  
Case, top cover and decorative frame: PC resin, light gray  
Sunshade: Aluminum, light gray, paint  
Dome cover: PC resin (transparent)  
Dimensions  
×
330.5 (H)mm  
Weight  
Accessory  
3.9kg  
Dimensions  
Camera section external diameter: ø230  
Dome external diameter: ø 150mm  
3.9kg  
×
330.5 (H)mm  
Top cover mounting screw (Hexagon socket screw M4 × 8) × 3,  
CD-R (Camera controller software, manual (PDF)) × 1  
Weight  
Option  
Wall mounting bracket: C-BC711W, Suspension bracket: C-BC711P,  
Pole mounting bracket: C-BC711PM, Smoked dome cover: C-A 711DM  
Accessory  
Top cover mounting screw (Hexagon socket screw M4 × 8) × 3,  
CD-R (Camera controller software, manual (PDF)) × 1  
Option  
Wall mounting bracket: C-BC711W, Suspension bracket: C-BC711P,  
Pole mounting bracket: C-BC711PM, Smoked dome cover: C-A 711DM  
 
C-CC564/C-CC514  
COMBINATION DOME CAMERA (INDOOR USE)  
C-CC564 FEATURES  
• 255 preset positions  
C-CC514 FEATURES  
• 255 preset positions  
• 276X zoom (optical 23X, electronic 12X)  
• Tilt rotation range +5° – -185°  
(using Auto-Flip function)  
• Pan rotation range continuous 360°  
• Pan/tilt maximum rotating speed is 360°/sec  
• 1/4 type CCD image device  
• 480 lines high resolution  
• 264X zoom (optical 22X, electronic 12X)  
• Tilt rotation range +5° – 90°  
• Pan rotation range continuous 360°  
• Pan/tilt maximum rotating speed is 360°/sec  
• 1/4 type CCD image device  
• 480 lines high resolution  
• Autofocus  
• Wide dynamic range  
• Autofocus  
• High-sensitivity function  
(color mode)  
• Preset sequency function  
• Restricting camera movement  
• Auto-trace function  
• Auto-tour function  
• Auto-pan function  
• High-sensitivity function  
(color and B/W modes)  
• Preset sequency function  
• Privacy masking function  
• Restricting camera movement  
• Auto-trace function  
• RS-485 protocol compatible  
• Auto-tour function  
• Motion detection function  
• Auto-pan function  
• Preset image freeze function  
• RS-485 protocol compatible  
C-CC514 SPECIFICATIONS  
C-CC564 SPECIFICATIONS  
Power source  
Power consumption  
Control  
24V AC 50/60Hz  
Power source  
Power consumption  
Control  
24V AC 50/60Hz  
9W (normal operation), 19W max. (1.3A max.).  
RS-485 communications system (new protocol compatible)  
VBS 1.0V(p-p), 75, BNC-R jack  
9W (normal operation), 19W max. (1.3A max.)  
RS-485 communications system (new protocol compatible)  
VBS 1.0V(p-p), 75, BNC-R jack  
Video Output  
Video Output  
Camera Control Terminal RS-485 camera control connector  
Alarm Input 3 channels, no-voltage make contact input, open voltage: 18V DC,  
short-circuit current; Under 2mA (settable alarm action)  
Camera Control Terminal RS-485 camera control connector  
Alarm Input 8 channels, no-voltage make contact input, open voltage: 18V DC,  
short-circuit current; Under 2mA (settable alarm action)  
Auxiliary Contact Output 1 channel, open collector output, withstand voltage: 30V DC,  
Auxiliary Contact Output 2 channels, open collector output, withstand voltage: 30V DC,  
permissible current: Under 100mA,  
permissible current: Under 100mA  
relay contact output, permissible voltage: 110V DC, 125V AC,  
permissible current: Under 1A  
Synchronization  
ID  
Internal synchronization/power synchronization  
(phase adjustable when in power synchronization mode)  
Synchronization  
ID  
Internal synchronization/Power synchronization  
8 characters (alphanumeric and symbols)  
Camera, Position, Trace, Auto-pan, Tour, Home, Alarm, Sector, AUX  
(phase adjustable when in power synchronization mode)  
8 characters (alphanumeric and symbols)  
Camera, Position, Trace, Auto-pan, Tour, Home, Alarm, Sector, AUX  
No. of Preset Positions  
Automatic Operation  
Timer  
255 Positions  
Auto-pan, Preset sequence, Auto-trace (2 preset patterns (60s)), Tour (16 preset patterns)  
Refresh: Starts at the preset time every day or every week by timer settings  
Program: Settable 16 actions  
No. of Preset Positions  
Automatic Operation  
Timer  
255 Positions  
Auto-pan, Preset sequence, Auto-trace (2 preset patterns (60s)), Tour (16 preset patterns)  
Refresh: Starts at the preset time every day or every week by timer settings  
Program: Settable 16 actions  
Camera  
Image device  
Resolution  
S/N ratio  
1/4 type CCD  
Horizontal: 480 lines (at center)  
50dB  
Camera  
Image device  
Resolution  
S/N ratio  
1/4 type CCD  
Horizontal: 480 lines (at center)  
50dB  
Minimum Illumination  
High-sensitivity function 0FF: 1 lx (50 IRE), 0.3 lx (20 IRE)  
High-sensitivity function 0N: 0.03 lx (50 IRE), 0.01 lx (20 IRE)  
Minimum Illumination  
High-sensitivity function 0FF: 3 lx (50 IRE), 1 lx (20 IRE)  
High-sensitivity function 0N: 0.03 lx (50 IRE), 0.01 lx (20 IRE)  
Backlight Compensation Pattern 1/Pattern 2/Pattern 3/OFF  
High-Sensitivity Function Slow shutter mode (32 times max.)  
Backlight Compensation WIDE DYNAMIC/Pattern 1/Pattern 2/Pattern 3/OFF  
Dynamic Range 46dB (backlight compensation: WIDE DYNAMIC operation)  
High-Sensitivity Function B/W mode and slow shutter mode (32 times max.)  
White Balance  
Flicker Reduction  
Electronic Zooming  
Auto-Focus  
ATW/AWB  
Automatic correction  
12x zooming  
White Balance  
Flicker Reduction  
Electronic Zooming  
Auto-Focus  
ATW/AWB  
Automatic correction  
12x zooming  
One push/stop AF/continuous  
Lens  
Zooming  
22x  
One push/stop AF/continuous  
Effective Focal Length  
Effective Angle of View  
Maximum Aperture  
Zoom Speed  
f = 4.0 – 88mm (22X)  
Horizontal: 47.3° (W) – 2.2° (T), Vertical: 36.5° (W) – 1.7° (T)  
F 1.6 (W) – F 3.8 (T)  
WIDE end to TELE end  
Approx. 1.3s (preset operation), Approx. 2.4s (manual operation)  
Lens  
Zooming  
23x  
Effective Focal Length  
Effective Angle of View  
Maximum Aperture  
Zoom Speed  
f = 3.6 – 82.8mm (23X)  
Horizontal: 54° (W) – 2.5° (T), Vertical: 41.6° (W) – 1.9° (T)  
F 1.6 (W) – F 3.7 (T)  
WIDE end to TELE end  
Approx. 1.5s (preset operation), Approx. 2.9s (manual operation)  
Pan/Tilt Head  
Rotating Range  
Rotating Speed  
Panning: Endless 360° rotation, Tilting: +5° to –90°  
Panning/Tilting: 360°/s max. (preset operation), 360°/s max. (manual operation)  
Pan/Tilt Head  
Rotating Range  
Rotating Speed  
Panning: Endless 360° rotation, Tilting: +5° to –185°  
Panning/Tilting: 360°/s max. (preset operation), 360°/s max. (manual operation)  
Other Function  
Operating Temperature  
Operating Humidity  
Application  
Manual Limit  
–10˚C to +50˚C (continuously active for operation at temperature below 0°C)  
Under 90% RH (no due condensation produced)  
Indoor used  
Other Function  
Auto-Pan, Freeze Preset, Manual Limit, Privacy Masking (up to 8),  
Motion Detect (each 8 presets at each 4 positions)  
Finish  
Base: PC/ABS resin, cool gray  
Camera: PC/ABS resin, black  
Operating Temperature  
Operating Humidity  
Application  
–10˚C to +50˚C (continuously active for operation at temperature below 0°C)  
Under 90% RH (no due condensation produced)  
Indoor used  
Dimensions  
Weight  
ø168  
1.7kg  
×
234 (H)mm  
Finish  
Base: PC/ABS resin, cool gray  
Camera: PC/ABS resin, black  
Accessory  
Camera mounting screw × 4, Safety wire × 1,  
CD-R (Camera controller software, manual (PDF)) × 1  
Dimensions  
Weight  
ø168  
1.7kg  
×
234 (H)mm  
Option  
Ceiling mount cover: C-BC511C, C-BC511C-S  
Flush ceiling mounting bracket: C-BC511U, C-BC511U-S  
Ceiling suspension bracket: C-BC511P  
Wall mounting bracket: C-BC511W  
Accessory  
Camera mounting screw × 4, Safety wire × 1,  
CD-R (Camera controller software, manual (PDF)) × 1  
Anchor bracket: C-BC511A  
Option  
Ceiling mount cover: C-BC511C, C-BC511C-S  
Flush ceiling mounting bracket: C-BC511U, C-BC511U-S  
Ceiling suspension bracket: C-BC511P  
Wall mounting bracket: C-BC511W  
Anchor bracket: C-BC511A  
 
Brackets and Dome Cover for C-CC764/C-CC-714 (Outdoor Use)  
C-A711DM  
C-BC711P  
C-BC711W  
Smoked Dome Cover  
Suspension Bracket  
Wall Mounting Bracket  
The C-BC711P is exclusively designed to be  
used to suspend TOA's outdoor  
combination camera from a ceiling or eaves.  
The C-BC711W is designed to be used to  
mount TOA's outdoor combination camera  
on a wall.  
The C-A711DM Smoked Dome Cover is specially designed to  
be used in conjunction with TOA's Combination Cameras.  
The Dome Cover is used to make it difficult for individuals to  
see the camera's orientation.  
Finish  
Base: Aluminum, light gray, paint  
Pipe: Stainless steel (SUS304)  
Finish  
Base: Aluminum, light gray, paint  
Pipe: Stainless steel (SUS304)  
Dimensions  
Weight  
140 (W) × 164 (H) × 200 (D)mm  
Dimensions  
Weight  
140 (W) × 240 (H) × 188.1 (D)mm  
1.3kg  
1kg  
Transmissivity Approx. 30%*  
Accessory  
Camera mounting screw (M5×12, with washer) × 3  
Accessory  
Camera mounting screw (M5×12, with washer) × 3  
Finish  
Dome: PC resin, smoked  
Frame: PC resin, light gray  
Note: pay attention to the strength of the attaching portion.  
Note: pay attention to the strength of wall surface.  
Dimensions  
Weight  
ø219.8 × 128 (H)mm  
(Dome external diameter: ø150mm)  
400g  
C-BC711PM  
*As a general guideline, the minimum object illumination of the camera equipped with the  
Smoked Dome Cover is approximately 3.3 times that of the camera without the cover.  
Note: Be careful when installing the camera with this cover in low illumination location as the  
cover may cause camera sensitivity to decrease.  
Pole Mounting Bracket  
Using the optional YS-60B and C-BC711W, the  
C-BC711PM can mount the outdoor combination  
camera on a pole.  
Finish  
Stainless steel (SUS304)  
140 (W) × 200 (H) × 60 (D)mm  
700g  
Dimensions  
Weight  
Note: Reinforce the pole mounting bracket and mounting band separately for security when  
installing the camera in locations exposed to vibration or strong winds.  
Maintenance the unit, mounting bracket and mounting band periodically to ensure that there  
are no loose joint nor rickety parts.  
Brackets and Dome Cover for C-CC564/C-CC-514 (Indoor Use)  
C-BC511A  
C-BC511C  
C-BC511C-S  
Anchor Bracket  
Ceiling Mount Cover  
Ceiling Mount Cover (Smoked)  
The C-BC511A is specially designed to  
mount TOA's Combination Cameras directly  
on the wall. The bracket facilitates mounting of the camera on the  
plasterboard in the double ceiling or other locations where the  
mounting screws cannot be installed securely.  
The C-BC511C is a camera installation cover  
designed solely for mounting TOA's  
The C-BC511C-S is a camera installation  
cover designed solely for mounting TOA's  
Combination Cameras. The cover is used when  
Combination Cameras. The cover is used when  
mounting the Combination camera directly to a  
ceiling or wall or suspending it from the ceiling. The cover is used  
to make it difficult for individuals to see the camera's orientation.  
mounting the Combination camera directly to a  
ceiling or wall or suspending it from the ceiling. The cover is used  
to make it difficult for individuals to see the camera's orientation.  
Finish  
Case: PC/ABS resin, cool gray  
Dome cover: Acrylic resin, transparent  
Transmissivity Approx. 20%*  
Finish  
Surface-treated steel plate, black, paint  
132 (W) × 30 (H) × 70 (D)mm  
Finish  
Case: PC/ABS resin, cool gray  
Dome cover: Acrylic resin, smoked  
Dimensions  
Weight  
Dimensions  
Weight  
ø168 × 182.2 (H)mm  
(Dome external diameter: ø125mm)  
1.1kg  
Dimensions  
Weight  
ø168 × 182.2 (H)mm  
(Dome external diameter: ø125mm)  
Accessory  
Camera mounting screw × 4, Safety wire × 1, Paper pattern × 1  
220g  
220g  
*As a general guideline, the minimum object illumination of the camera equipped with the  
Ceiling Mount Cover is approximately 5 times that of the camera without the cover.  
Note: Be careful when installing the camera with this cover in low illumination location as the  
cover may cause camera sensitivity to decrease.  
C-BC511P  
Ceiling Suspension Bracket  
The C-BC511P is a Ceiling Suspension Bracket  
designed solely for suspending TOA's  
Combination Cameras from the ceiling.  
C-BC511U  
Flush Ceiling Mounting  
Bracket  
C-BC511U-S  
Flush Ceiling Mounting  
Bracket (Smoked)  
The C-BC511U bracket is designed to be  
exclusively used for flush ceiling mounting  
of TOA's combination camera. Use this bracket  
when mounting the camera to the ceiling surface  
The C-BC511U-S bracket is designed to  
be exclusively used for flush ceiling  
Finish  
Top cover: PC/ABS resin, cool gray  
Pipe: Stainless steel (SUS304)  
Bracket: Surface-treated steel plate, black, paint  
mounting of TOA's combination camera.  
Use this bracket when mounting the camera to  
Dimensions  
Weight  
ø150 × 233mm  
where the fixing screws cannot be securely installed, such as on  
the plaster panel of the dual-construction ceiling. Also, use this  
bracket to minimize the exposure of the camera.  
the ceiling surface where the fixing screws cannot be securely  
installed, such as on the plaster panel of the dual-construction  
ceiling. Also, use this bracket to minimize the exposure of the  
camera. The bracket is used to make it difficult for individuals to  
see the camera's orientation.  
1.2kg  
Accessory  
Top cover × 4, Safety wire × 1, Pattern paper × 1  
Finish  
Bezel: PC/ABS resin, cool gray  
Dome cover: Acrylic resin, transparent  
Bracket: Aluminum, black, paint  
Surface-treated steel plate, black, paint  
Transmissivity Approx. 20%*  
C-BC511W  
Finish  
Bezel: PC/ABS resin, cool gray  
Dimensions  
ø250 × 282.7 (D)mm  
(Dome external diameter: ø125mm)  
Dome cover: Acrylic resin, smoked  
Bracket: Aluminum, black, paint  
Surface-treated steel plate, black, paint  
Wall Mounting Bracket  
Weight  
1.2kg  
The C-BC511W Wall Mounting  
Bracket is specially designed to mount  
TOA's Combination Cameras to wall  
surfaces. Install the unit only in a location  
that can structurally support weight of the  
unit and camera.  
Dimensions  
ø250 × 282.7 (D)mm  
(Dome external diameter: ø125mm)  
Accessory  
Safety wire × 1, Paper pattern × 1  
Weight  
1.2kg  
Accessory  
Safety wire × 1, Pattern paper × 1  
* As a general guideline, the minimum object illumination of the camera equipped with the  
Flush Ceiling Mounting Bracket is approximately 5 times that of the camera without the bracket.  
Note: Be careful when installing the camera with this bracket in low illumination location as the  
cover may cause camera sensitivity to decrease.  
Finish  
Top cover: PC/ABS resin, cool gray  
Pipe: Stainless steel (SUS304)  
Bracket: Surface-treated steel plate, black, paint  
Dimensions  
Weight  
150 (W) × 203 (H) × 203 (D)mm  
1.1kg  
Accessory  
Top cover × 4, Safety wire × 1, Paper pattern × 1  
 
Combination Dome Camera  
SETTING GUIDE  
SETTING GUIDE  
The camera menu screens are comprised of the following  
Sets the stop duration of trace movements.  
Sets the operation to be programmed.  
TRACE 2 PAUSETIME  
TOUR  
setting item screens.  
CAMERA MENU  
PRESET  
Sets alarm operations.  
ID SETTING  
CAMERA  
ALARM SETTINGS  
AUTO MODE  
Sets input number of alarm input.  
INPUT  
Sets the terminal that transmits the alarm  
information.  
REPORT  
Setting Item  
Selects whether to activate the alarm input  
with make or break contacts.  
ACTIVE  
Programs the camera position (camera orientation),  
displays setting status, and performs reset.  
PRESET SETTING  
Sets whether to forcibly execute action or to  
set priority order to operation.  
PRIORITY*4  
ACTION*4  
CLOCK  
PRESET MEMORY*1  
Programs the camera position.  
Sets camera operation when alarm signal  
is received.  
GLOBAL PRESET  
MEMORY CORRECTION  
Sets the period of time that alarm conditions  
are maintained.  
Corrects all preset camera positions.  
Sets camera operation when the alarm  
conditions are released.  
RESET ACTION*4  
ALARM LOGS  
PRESET MEMORY RESET  
PRESET MEMORY ALL RESET  
AUTOMATIC RETURN  
Resets preset camera position.  
Verify alarm logs.  
Resets all preset camera positions.  
The camera returns to the preset position  
automatically when the preset period of  
time elapses by external control.  
Sets contact output.  
CONTACT OUTPUT SETTINGS  
Designates the program the camera  
automatically returns to.  
HOME  
Sets contact output.  
Sets contact output.  
AUX1  
Displays the still image during camera  
movement between preset positions.  
FREEZE PRESET  
AUX2*5  
Sets the title.  
ID (TITLE) SETTINGS  
Sets the timer.  
TIMER SETTINGS  
DISPLAY  
Sets to display or hides the title.  
Sets ID.  
Sets predetermined operations to be  
performed at preset times.  
PROGRAM*4  
TIME DISPLAY  
DATE DISPLAY  
TIMER  
ID SETTINGS*2  
Sets time display to 12-hour or 24-hour  
display formats.  
DISPLAY POSITION SETTINGS*2  
FRAME ADJUSTMENT SETTINGS  
ANGLE ORIGIN POINT SETTING  
Sets title display position and its length.  
Sets date display.  
Sets the time.  
Sets the date.  
Sets the character display position.  
Sets the origin point of the angle display.  
DATE  
Sets camera properties.  
CAMERA SETTINGS  
Individual settings.  
MANUAL SETTINGS  
WHITE BALANCE*2  
Sets the camera's white balance.  
Sets the backlight compensation.  
Adjusts the camera's brightness.  
Resets zoom interlocking.  
ZOOM INTERLOCKING  
ROTATION LIMIT  
ROTATION LIMIT SETTING  
MANUAL SPEED  
FLIP*3  
BACKLIGHT COMPENSATION*2  
Designate the pan and tilt rotation limits.  
Sets the pan and tilt rotation limits.  
BRIGHTNESS*2  
Sets to give operation priority to black &  
white mode or slow shutter mode  
depending on the subject’s brightness.  
DAY AND NIGHT*2 *3  
Sets the maximum speed of pan and tilt  
operation.  
Sets whether to set the tilt rotation range to  
90 or over.  
Sets Auto Focus mode.  
Sets AGC.  
AUTO FOCUS  
AGC*2  
Sets the tilt angle limit.  
TILT ANGLE LIMIT  
SLOW SHUTTER*2  
SHUTTER SPEED*2  
ELECTRONIC ZOOM  
ENHANCER*2  
CHROMA*2  
Sets slow shutter.  
Sets shutter speed.  
Sets functions during maintenance.  
MAINTENANCE SETTINGS  
Sets a maximum enlargement of  
electronic zoom.  
Corrects deviation of stepping motor.  
Corrects deviation of position.  
INITIALIZING  
REFLESH  
Sets contour enhancement.  
Adjusts the chroma.  
Sets the password required when activating  
maintenance menu screen.  
PASSWORD  
Improves deviation of preset position.  
MOTOR POWER  
INITIAL STATUS  
AUTOMATIC CORRECTION  
DATA BACKUP  
Switches sync. system and adjusts phase.  
SYNC SYSTEM  
INITIALIZING  
Returns all setting to initial status set by  
the factory.  
Return each item on the camera setting  
screen to the factory default status.  
Automatically corrects deviation of position.  
Sets data writing and reading.  
Sets motion detection.  
Sets automatic operation of Auto-Pan, Preset  
sequence, Trace and Tour.  
AUTOMATIC OPERATION  
Assigns automatic functions to the  
Auto key.  
MOTION DETECTION*3 *4  
PRIVACY MASKING*3  
AUTO KEY  
Sets privacy masking area.  
AUTO PAN  
Sets the Auto-Pan operations.  
Sets the preset sequence order.  
Stores trace movements.  
SEQUENCE  
TRACE  
*1 Setting for this item can be entered by the Main Menu screen not by the Camera Menu screen  
when the equipments other than the C-RM500 are connected.  
*2 Can also be changed for individual positions at the Camera setting screen for individual positions.  
*3 Can be only set for the C-CC564 and C-CC764.  
TRACE 1 PAUSETIME  
Sets the stop duration of trace movements.  
*4 Can be only set when the C-RM500 is connected.  
*5 Can be only set for the C-CC564.  
 
C-CC764/C-CC714  
APPEARANCE AND DIMENSIONAL DIAGRAM  
C-CC764/C-CC714  
C-BC711W  
Multi-pair cable 8 P,  
loose end  
Cable end: 2 P loose end  
BNC-R jack  
Coaxial cable length  
Approx. 1.8 m  
Power cord length  
Approx. 1.8 m  
Applicable camera  
(option)  
Multi-pair cable length  
Approx. 1.8 m  
279  
Wall mounting example  
140  
100  
4–ø11.4  
ø179.9  
Safety wire length  
Approx. 20 cm  
17  
164  
ø48.3  
188.1  
ø150  
ø218.5  
ø230  
Hook to connect  
safety wire  
30  
C-BC711P  
Hook to connect  
safety wire  
30  
20  
ø48.3  
140  
100  
Cable entry hole  
on a ceiling ø50  
4–ø11.4  
Applicable camera  
(option)  
Ceiling mounting example  
C-A711DM  
C-BC711PM  
Wall mounting bracket  
C-BC711W (option)  
Applicable camera  
(option)  
Safety wire fixing screw  
Pole mounting bracket  
YS-60B (option)  
Pole  
A
ø219.8  
10  
30  
Mounting example  
140  
100  
ø80  
Figure as viewed from point A  
4–ø11  
Unit: mm  
 
C-CC564/C-CC514  
APPEARANCE AND DIMENSIONAL DIAGRAM  
C-CC564/C-CC514  
C-BC511A  
13x35  
4–ø4.5  
4–ø4.5  
(Anchor bolt mounting hole)  
(Electric work box mounting hole)  
Connector 1  
BNC jack  
4–ø7  
4–M4  
(Safety wire mounting hole)  
(Camera mounting hole)  
Power supply  
terminal block  
60  
84  
122  
132  
Safety wire (accessory)  
Anchor bolt  
C-BC511A  
Camera mounting screw  
(accessory)  
Ceiling board  
(Connect this wire to  
an object other than  
the bracket.)  
C-BC511C (option)  
or C-BC511C-S (option)  
ø118  
ø168  
(View of an optional camera  
installation cover attached)  
INSTALLATION EXAMPLE  
Note: The mounting hole in the ceiling  
is ø144–ø150 mm in diameter.  
Mounting to a heavy-duty ceiling (such as a concrete ceiling)  
1. When routing both the coaxial, 2. When routing both the coaxial,  
C-BC511C (option)  
power cables and signal cable  
from the speaker side.  
power cables and signal cable  
Camera  
center  
or C-BC511C-S (option)  
from the ceiling panel.  
ø80–ø90  
Applicable camera  
(option)  
60  
Anchor bolt  
(female screw)  
mounting distance  
Note: For anchor bolts, use the unit  
driving type female screws (M4).  
Ceiling mounting  
C-BC511C/C-BC511C-S  
C-BC511P  
4–ø5  
(Ceiling mounting hole)  
Note: When extending a pipe,  
use a commercial “88”  
stainless steel wound  
pipe or copper sheet  
wire tube (ø48.3 mm).  
(In this event, make  
Drop prevention screw  
(M5)  
40  
81  
holes as illustrated.)  
Safety wire (accessory)  
(Connect this wire to  
an object other than  
the bracket.)  
ø48.26  
Applicable camera  
(option)  
“C” channel bracket  
Ceiling board  
Ceiling hole  
ø125  
ø168  
ø150  
Top cover  
(accessory)  
Drop prevention screw  
(M5)  
C-BC511C (option)  
or  
C-BC511C-S (option)  
C-BC511C  
4–M4  
ø168  
(Ceiling mountion hole)  
Applicable camera  
(option)  
Mounting  
60  
Ceiling mounting  
Note: The mounting hole in the ceiling is  
ø40–ø50 mm in diameter.  
C-BC511U/C-BC511U-S  
C-BC511W  
Cable entry hole  
2–10x20  
(Safety wire mounting hole)  
10x20  
(Anchor bolt mounting hole)  
4–ø6  
4–ø5  
81  
40  
(Wall mounting hole)  
228  
Cable entry hole  
ø150  
128  
203  
ø125  
ø250  
C-BC511W  
Safety wire (accessory)  
(Connect this wire to  
an object other than  
the bracket.)  
Anchor bolt  
C-BC511U  
C-BC511C (option)  
or C-BC511C-S (option)  
4–M4  
(Camera mounting hole)  
Ceiling board  
Applicable camera  
(option)  
Wall mounting  
60  
Note: The mounting hole  
in the ceiling is  
Applicable camera  
(option)  
ø232–ø236 mm  
in diameter.  
Ceiling mounting  
Unit: mm  
 
C-RM500  
REMOTE CONTROLLER  
The C-RM500 Remote Controller is designed for use in camera-  
based systems that allow remote control from up to 1.2km away  
over RS-485 communication lines. It allows video images to be  
switched remotely and can handle a maximum of 16 TOA's  
Combination Dome Cameras when used together with the TOA  
Multiplexer. Easy-to-see LEDs inform status of control, alarm, focus  
and other functions.  
APPEARANCE AND DIMENSIONAL DIAGRAM  
326  
57.9  
25  
31.7  
Control up to 16TOA's Combination Dome Cameras  
Realtime control as well as preprogrammed position retrieval of  
up to 255 positions is provided. Each position allows providing a  
specific title as well remote image quality adjustment.  
185.2  
Figure of the installed unit  
Instant position recall  
Unit: mm  
The most used camera and position numbers can be assigned to  
function keys A through H for one-touch instant recall. Other  
camera numbers and position numbers can be assigned to ID  
numbers from 1 through 512 and easily retrieved using the ten-  
key pad.  
SPECIFICATIONS  
Power Source  
12 V DC  
Current Consumption  
Slave Remote Controller RS-485, screwless connector  
Camera Control  
Switcher Control  
150 mA  
Controls Multiplexer  
RS-485, screwless connector (*1)  
RS-485, screwless connector  
RS-232C, D-sub connector (9 pins, male)  
RS-232C, D-sub connector (9 pins, male)  
Alarm output: 16 channels, NPN open collector output,  
withstand voltage: 30 V DC,  
The C-RM500 can also control the TOA multiplexers and allows  
switching video image display modes – single screen, single  
screen in sequence, 4-screens in sequence, as well as 4, 9, 10  
and 16-segment split screens.  
Alarm Input  
Alarm Output/  
Control Input  
control current: 20 mA  
Alarm input: 1 channel, no-voltage make contact input,  
open voltage: 5 V DC,  
short-circuit current: 5 mA max.  
Home position selection input:  
Alarm capability  
Alarm signals received by the alarm input of combination dome  
cameras can be transmitted to the C-RM500 via a pair of RS-485  
communication line where the C-RM500’s alarm operations can  
be activated, based on the alarm signal type received.This has  
reduced the number of signal lines that were conventionally  
required in an expanded system. An Alarm Hold function allows  
temporarily suspending automatic switching of video images  
triggered by an alarm to enable the operator to prioritise the  
screen currently being viewed. In addition, the C-RM500 can  
receive alarm signals from an C-AL80 unit through the  
RS-232C port.  
1 channel, no-voltage make contact input,  
open voltage: 5 V DC, short-circuit current:  
5 mA max.  
D-sub connector (25-pins, female)  
Display  
LED indication of control status, alarm status, alarm hold  
status, still picture status, defroster, auxiliary setting, auto,  
auto focus, and lens speed  
LCD indication of key entry confirmation  
Continuous alarm tone (can be turned on and off)  
Alarm Signal  
Number of Unit  
Connections  
Maximum Cable  
Distance  
Up to 2 (one to be set for MASTER unit, another for  
SLAVE unit)  
1.2 km (*2) (between the Remote controller and the  
Combination cameras)  
OperatingTemperature 0°C to +50°C  
Operating Humidity  
Finish  
Under 90% RH (no due condensation produced)  
Panel: Surface-treated steel plate, sand gray, paint  
Sides: Rubber  
326 (W) × 62 (H) × 185.2 (D) mm  
1.8 kg  
2 Location Control  
The system can be independently controlled in two separate  
locations by installing 2 C-RM500 units.  
Dimensions  
Weight  
Accessory  
D-sub connector (9 pins, male) × 1,  
D-sub connector(25 pins, male) × 1  
Applicable Model  
(option)  
Combination dome camera: C-CC504S, C-CC554S  
Switcher: C-MS161D, C-MS91D  
Slave remote controller: C-RM500  
Interface unit: C-IF500  
Alarm unit: C-AL80  
(*1) Can connect up to 31 units mixing with combination cameras and interface units.  
(*2) Applies to the system where the unit and combination camera are connected in a matched pair.  
Represents the total of connected cable distances if multiple combination cameras or interface  
units are connected in the system (when the CPEV-S cable thicker than 0.65 mm in diameter is used)  
.
 
C-AL80  
C-IF500  
ALARM UNIT  
INTERFACE UNIT  
A useful option for configuring camera systems, the C-IF500  
functions as a splitter. It provides control over expanding a camera  
system when the distance is over 1.2km (max. 3km) between the  
dedicated C-RM500 Remote Controller and system cameras linked  
to it. It will also allow configuring a star connection. Receiving the  
RS-485 communication line serial signals, the C-IF500 splits the  
signals into 4-channel data for slave units and converts into  
RS-232C data to be used for public line or fiber optics communi-  
cation. Data communication between master and slave terminals is  
bidirectional.The C-IF500 also allows easily setting the data  
communication data transfer rate in four increments via DIP switch  
to suit network requirements.  
The C-AL80 Alarm Unit serves as the main controller for the alarm  
requirements of a system by converting alarm signals initiated by  
externally connected equipment into RS-232C-compatible signal  
data. In addition to its 32 alarm or remote inputs, the C-AL80 can  
also be linked to a maximum of 8 other C-AL80 units in master/  
slave configurations.This provides a total of 256 alarm or remote  
inputs to be transmitted to the C-RM500 remote controller.  
APPEARANCE AND DIMENSIONAL DIAGRAM  
APPEARANCE AND DIMENSIONAL DIAGRAM  
420  
210  
Front cover  
335.8  
11  
319.8  
284.1  
279.8  
Enlarged figure for  
the inside of a front cover  
Unit: mm  
Unit: mm  
SPECIFICATIONS  
SPECIFICATIONS (H/L)  
Power Source  
12 V DC  
100 mA  
Power Source  
H: 230 V AC, 50/60 Hz  
L: 120 V AC, 50/60  
under 3 W  
Current Consumption  
External Control  
Power Consumption  
Alarm/Remote Input  
Master: RS-485, screwless connector  
terminating resistance (100 ) switch ON/OFF  
Slave(*1): 4 channel, RS-485, screwless connector  
RS-232C, D-sub connector (9-pin, male)  
32 channels, no-voltage make contact input, open  
voltage: 5 V DC, short-circuit current: max. 5 mA, M3  
screw terminal, distance between barriers: 7.62 mm  
Display  
Power LED indicator, communication LED indicators  
(TX, RX)  
Control Input/Output  
1 channel, RS-232C, D-sub connector (9 P, male)  
(only valid for master unit), fixed to 38,400 bps  
Maximum Cable  
Distance  
RS-485: 1.2 km (*2)  
RS-232C: 10 m  
Master/sub Connection 2 channels, RS-485, maximum cable length: 1200m,  
Terminal  
DIN connector (5 P)  
Communication Speed 4800 bps, 9600 bps, 19200 bps, 38400 bps  
OperatingTemperature -10°C to +50°C  
Alarm Reset Input  
1 channel, no-voltage make contact input, open  
voltage: 5 V DC, short-circuit current: max. 5 mA, D-sub  
connector (25 P)  
Operating Humidity  
Finish  
Under 90% RH (no due condensation produced)  
Panel: Aluminum, black, 30% gloss, paint  
Case: Pre-coated steel plate, 30% gloss, black  
Setting Switches  
Master/Slave: 3-bit DIP switch  
(Selection of Master or Slave 1—7)  
Alarm/Remote: 1-bit DIP switch  
Dimensions  
Weight  
210 (W) x 46 (H) x 284.1 (D) mm  
1.4 kg  
(Alarm/Remote selection)  
Alarm time: 1-bit DIP switch (Edge/Level selection)  
RS-485 terminal: Rear-mounted slide switch (RS-485  
termination, Enable/Disable selection)  
Option  
Rack mounting bracket:  
M-15B-BK (for rack mounting one C-IF500 unit)  
MB-15B-J (for rack mounting two C-IF500 units)  
Application  
OperatingTemperature 0°C to +50°C  
Finish  
Indoor use  
(*1) Communications cannot be made between slave terminals.  
Each slave terminal can connect up to 31 cameras. (except RS-232C port)  
(*2) Applies to the system where the unit and combination camera are connected in a matched pair.  
Represents the total of connected cable distances if multiple combination cameras or Interface  
units are connected in the system (when the CPEV-S cable thicker than 0.65 mm  
in diameter is used).  
Panel: Aluminum extrusion, black, 30% gloss  
Case: Pre-coated steel plate, black, 30% gloss  
420 (W) × 96.6 (H) × 335.8 (D) mm  
3.6 kg  
Dimensions  
Weight  
Accessory  
DIN plug × 2, RS-232C cable (2 m) × 1, D-sub  
connector (25 P) × 2, Power cord (2 m) × 1  
Option  
Application Model  
Rack mounting bracket: MB-23B  
Remote controller: C-RM500  
 
SYSTEM EXAMPLES  
1. Combination Dome Camera (1 unit)  
2. Combination Dome Camera (16 units)  
Combination  
Dome Cameras  
C-CC564  
Remote Controller  
Combination  
Dome Cameras  
C-CC564  
C-RM500  
Remote Controller  
C-RM500  
C-MS161D  
max.  
16  
Multiplexer  
Monitor  
Monitor  
3. When Combination Dome Camera and Remote  
Controller are separated by more than 1.2km.  
max. 3km  
C-IF500  
C-IF500  
Remote Controller  
C-RM500  
Combination  
Dome Cameras  
C-CC564  
CC-3331B  
Cable Compensator  
Monitor  
4. Sensor-activated Dome Camera operation.  
Sensor  
Combination  
Dome Cameras  
C-CC564  
max. 8  
max. 3  
Remote Controller  
C-RM500  
C-MS161D  
Multiplexer  
RS-232C  
C-CC514  
C-CC764  
Sensor  
Monitor  
C-AL80  
C-AL80  
Alarm Unit  
C-AL80  
max. 3  
max. 256  
TOA Corporation  
Specifications are subject to change without notice.  
Printed in Japan (0307) 833-53-001-5A U  
 

Technicolor Thomson Projection Television DLW 616 User Manual
Toastmaster Toaster T100 User Manual
Toastmaster Toaster T2020B User Manual
Toro Lawn Mower 71430 71432 User Manual
Toshiba Computer Drive SD R2212 User Manual
Toshiba Network Card DK16 User Manual
Toshiba Printer B SX6T User Manual
Tripp Lite TV Cables N001 007 BK User Manual
Troy Bilt Lawn Mower V809h User Manual
Waves Model Vehicle APA44M User Manual